When positioning a 2-post car lift, it is important to consider the space between the lift and sidewalls. You will need about research they conducted two feet of space between the vehicle and sidewalls. If you have less space, it will be difficult to maneuver the vehicle and you won't have enough room to work.
Space requirements for a 2-post car lift
If you want to install a two-post car lift, you need to make sure that you have adequate space to mount it. You need a minimum of two feet of space between the vehicle and the sidewall. Anything less will cause issues during installation and may also restrict the ability to remove components. You must also consider the length of the vehicle and the height of the ceiling.
Two-post car lifts are available in a variety of configurations, such as overhead, baseplate, or freestanding. The baseplate configuration has a low baseplate between the posts, while overhead models have a crossbeam at the top. Depending on the configuration you choose, you may need extra space for the car's baseplate. The free-standing configuration does not have a crossbeam, but may be less suitable for rooms with high ceilings or a smooth floor. You should also consider the asymmetrical arm of the lift, as it will impact the space available in front of the car.
Choosing the right type of lift depends on your requirements. If you're simply planning on using it for storing your car, you'll probably want a four-post lift. If you have limited space in your garage, you might want to consider a single-post lift instead.
Height requirements
Before you buy a two-post lift, you need to know how high the ceilings of the area you want to use it in. The height of the ceiling should be at least two feet higher than the height of the lift. This is necessary for the lift's two tall posts and the connecting bracket, which can be either on the floor or across the posts.
There are many different make and model two-post car lifts available, depending on the configuration you need. Some are overhead while others are baseplate or freestanding. The overhead models feature a crossbeam at the top of the lift, whereas baseplate models have a low baseplate between the columns. Freestanding models do not have a crossbeam, but are not suitable for smooth floors or other height restrictions.
Another important consideration is the ceiling height of the building. You need to make sure that the garage ceiling is at least 12 feet high to accommodate the lift and the user. You should also leave two feet of space around the lift.
Space between vehicle and sidewalls
When installing a two post lift, keep in mind that it is important to leave enough space between the vehicle and the side walls. There are no golden rules when it comes to this, but generally speaking, you should leave about two feet between the side walls and the post that will be holding the vehicle. Any less space will cause the vehicle to be difficult to maneuver and won't provide enough space to perform work.
To determine the amount of space needed between the vehicle and the columns, consider the width of your vehicle. Generally, a two-post lift will have 30% of the vehicle in front of the column and 70% in the rear. An 18-foot vehicle will leave three feet of space between the front of the vehicle and the front of the columns, while a 25-foot truck will need one foot of space at each end.
Besides height, a 2 post lift needs at least two feet of space between the vehicle and the sidewalls. A smaller space will limit the lift's ability to reach components and will restrict the vehicle's ability to be removed. Additionally, you need to ensure that your shop has a high enough ceiling height to safely install a lift.
Positioning
There are a number of factors to consider when positioning a two post lift from the wall. The lift's height needs to be appropriate for the ceiling and there should be enough space around columns for the lift to extend beyond the floor. When installing a lift, make sure to follow the manufacturer's installation instructions to ensure proper alignment.
The recommended distance between the lift and the bay door depends on the type of lift you use and the size of your bay. The ideal distance is around 13 feet, but the exact distance can vary depending on your specific needs. This will allow enough room to drive a car into the shop while preventing it from sticking out the back door.
Positioning a 2-post lift from the wall is easier than you might think. For example, if you have a small garage, you can mount a 2-post lift in an accessible location. This will enable you to work on your car from a safer position.